iDRY Turbo Pro
The Biggest Turbo! A heating plate style vacuum kiln with the bladder press to produce the flattest wood faster than any other method.
$699,000
Max Capacity: 15,000BF (More Info)
Operating Cost: $0.04 to $0.06 per board foot
Drying Time: Approximately 2x faster than iDRY Standard and PLUS
Lumber Pile Dimensions: 27ft L x 94in W
Power Requirement: 480V 3PH 80A
Heating: (64) Hot water heating plates (electric + gas boiler) (185F max temp)
Installation: Installed in above freezing and dry space, water connection, 480V 80A power. For best performance ambient temperature should be 60-80F. Transverse Trolley requires track installed on the concrete slab and power festoon.
Water requirement: 1/2” connection, managed treated water
Controls: Touch Screen
Total Weight of Kiln equipment: 50,000lbs
1 Year Limited Warranty
Includes:
64 Aluminum Hot Water Heating Plates
Touch screen controls with remote control
Vacuum System
Fan Cooled Condenser System
Automatic Condensate drain system
Rubber Bladder Press (360,000lbs of downward flattening force)
Internal Trolley
Electric Heater
Gas Boiler
Additional:
Automated Vacuum Stacking System: $275,000 (required)
(2) Stacker Docking Platforms: $25,000 (required)
Motorized Transverse Trolley with wireless remote: $150,000 (required)
Extra Set of Heating Plates (64 plates): $255,000 (optional)
Extra Internal Trolley: $55,000 (optional)
Freight not included
Lead time: 6+ Months (subject to change without notice)
ALL iDRY KILNS MEET THE USDA HEAT TREAT STERILIZATION REQUIREMENTS.
The iDRY TURBO Pro is our heating plate style vacuum kiln. This wood dryer uses heating plates to directly heat wood under a lower vacuum than the other iDRY models, which makes it the fastest method of drying lumber while still offering superior quality over other drying methods. The press option is also very effective with this style of kiln thanks to the heating plates’ ability to distribute all the force of the bladder down on every square inch of the lumber.
This kiln is sized and designed for furniture, cabinet and millwork shops who are looking for the flattest dried lumber possible. Cabinet manufacturers especially have seen 30-40% yield increases and major throughput improvements. Imagine receiving green lumber on Monday, drying it, and putting it directly into your 4 sided planer/moulder by the end of the week! No ripping, cutting and planing to get a flat piece of wood you can actually work with!!
